Katsastusnostin suurille paketti- ja matkailuautoille

Nostokyky 6000 kg. Ajosillan pituus 6000 mm

Pitkäajosiltanostin vaativaan katsastuskäyttöön. UC 600K on katsastuskäyttöön suunniteltu, toimintavarma, vähäisen huoltotarpeen omaava sähköhydraulinen nostin. Huollettavat kohteet ovat helposti tavoitettavissa. Ei sivupilareita, rajoittamassa liikkumista tai viemässä työtilaa.

Nordlift UC is without columns and scissor construction. Free access to underbody from the side.

  • Easy to access the underbody, even with tool trolley or waste oil equipment.
  • Long life construction. Practice tested corresponding 25 years workshop use.
  • Lift is designed in co-operation of MOT / Workshop users.

To make the work easier

Nordlift Pilot ™ platform lifts are controlled by two buttons. The lift is automatically locked. Lifting time depending on the model only 12 to 30 seconds. As the lift construction is very low, it is easy to drive the vehicle on the lift, whether on floor or in-ground version.

The only platform lift with free access from the side

Nordlift UC -lift construction do allow to reach the underbody from the side, even with tool trolley or with waste oil collector - compared to the scissor lifts. This feature simplifies and speeds up the working procedure.

Practice tested construction; comply 25 years use in daily workshop use. Maintenance free construction.

Compared to mechanical lifters, the wear of electro- hydraulic Nordlift UC lifts is very low.

Safe in all circumstances

Nordlift Triple Safety System ™ is three-fold, continuous and automatic safety system. U-platform lifts have duplicated hydraulic, mechanical intermediate beam and lock valves on both cylinders. Both cylinders alone manage to keep up the load safely in all situations. Hydraulic hoses are protected by a groove or recessed into the floor.

Nordlift Level ™ automatic controls the level of the platforms and stop the lift if there is height difference between the platforms. The car remains level.

Less than 70 db sound level - No exposure to noise. The hydraulic unit may also be placed in a separate room and so to get absolutely silent working area.

Easy to install, also as an in-ground version.

UC-platform lift minimum height is only 180-190 mm, so the lift can also be mounted on floor, and is still easy to drive the vehicle on the lift. The lift can also be supplied to an existing in-ground place with tailor made dimensions to prevent alteration of the installation site.

 

UC-series-en-Lifts for Vehicle Inspection-Nordlift-409

 

Nordlift lifts for inspection uc 6000 dimension drawing 64

(Click for larger image)

TECHNICAL DATA

UC 6000 K

Application

Heavy duty inspection

Lifting capacity

6000 kg

Lifting height

1850 mm

Lifting time

44/22 sec

min. height

190 mm

The length of the platforms

6000 mm

the width of the platforms

640 mm

The total length of the lift

6855 mm

Overall width

2550 mm

Protection class

IP 55

Motor

3,0 kW

Power supply

3 x 400 V

integrated play detector

Yes

Jacking beam

Yes

Long rear slip plates and
necessary cover plates

Tandem version available

6000 + 6000 Kg

 

ACCESSORIES

Lift table
Pneumatic Hydraulic jacking beam allows to work with very low vehicles. Capacity 2600 kg, a weight of only 90 kg, the minimum height of 158 mm, 292 mm lifting movement, the lifting arms width of 800-1600 mm.

Play Detector
Reliable and effective Play detector is installed in the lift only on one platform. Operating lamp has buttons to provided through the Play detector the necessary lateral and torsional movement, which makes the play visible - even in the rear axle housing. 7 m spiral cable as a standard in operating lamp.

Faster versions
A faster, turbo version (UC 6000 22 s) is available, with two hydraulic units.

Optional extras available
The light kit, compressed air connection, adjusting feet, long ascent plate, over-drivable ramp, SPECIAL MODELS

 


Related Products: